TuffRail

TuffRail is an industrial handrail system offered by Moddex. It is designed to provide AS 1657 compliant protection for workers across mezzanines, stairs, loading bays, and other industrial applications.

Moddex Tuffrail industrial handrail systems ensure workers, pedestrians, employees and site visitors are protected.

This range boasts three material options – being suited for general warehouse use, through to use in extremely high corrosion areas.

The innovative Tuffgard® Toeboard is incorporated into this range for applications with open access beneath where an object could fall (Refer AS/NZS 1657).

Range of Products

With five configurations available in the Tuffrail family (with variations), Moddex industrial handrails offer:

Single rail edge protection for “on ground” applications Top and mid rail designs incorporating Tuffgard® Toeboard Hot Dip Galvanized Steel, Aluminium – Mill Finish and 316 Grade Stainless Steel options Y14 Safety Yellow powder coat (Dulux Duralloy) finish product in stock Custom powder coating options (available on request)

TuffRail Systems

• TR10 - Single Toprail

• TR20 - Top and Midrail

• TR25 - Top and Midrail with Kickplate

• TR30 - Top, Mid, and Bottom Rails
• TR35 - Top, Mid, and Bottom Rails with Kickplate

TR Gate

• MD582.600-1500 - Self Closing Gates with various sizings

Compliance

Moddex TR20 handrails are designed and manufactured in accordance with Australian Standard AS1657:2018 and relevant statutory WHS Codes of Practice/ Guidelines. Galvanized to AS 4792 and AS/NZS 4680:2006 (where applicable)

Common compliances

• Moddex standard TR height is 1045mm however it can be designed between 900mm-1100mm in accordance with AS1657

• Gaps between railing must be minimum 50mm

• When creating TR as a barrier for headwalls, they don't need to be connected

Technical Data

Material

Stanchion & Rails	Clamp Fittings	Clamp locking screws
Steel/grade C250 & 350	Malleable Cast iron	Stainless Steel (304)

Protective Coating

Stanchion & Rails	Clamp Fittings	Optional
G390 Hot Dip Galvanized (min 390g/m2)	Hot-dip Galvanized with patented protective coating on threads	Powder coating and paint specs*

Dimensions

Stanchions & Rails

Diameter	Nominal Thickness
48.3mm OD	3.2mm

Clamp Fittings

Thickness	Locking Screws
5.0mm (approx)	M12 x 1.75 x 11mm - DEXX® Drive

See also

• Australian Standards
• AssistRail - Disability Handrail
• Conectabal - Commercial Balustrade
• Bikesafe - Bikeway Barriers
• Bridgerail - Bridge Barriers
• Quick Find Guide
• Fixings
• Pipe Types