Contained on this page are examples of weld symbols on different types of fabrication drawings. These drawings range from panels, pipes, custom parts & site instructions. Weld symbols are a necessary part of creating fabrication drawings, as it explains the size & type of weld we require our fabricators to create.

Understanding a Weld Symbol

The weld symbol is an easy representation of the type of weld, its size, and other processing and finishing information. Below is an example weld symbol, showing the structure of the symbol & what each part represents. DRAWING TO BE CREATED

Panels

On balustrade panels, regardless of rod size (12, 16, 20mm), we will always use a typical 4mm fillet weld all-round. Below are example drawings of 12mm, 16mm & 20mm rod panels.

12mm Rod

16mm Rod

20mm Rod

Pipe to Plate

When welding plates to pipe, a 5mm fillet weld all-round is used. Below are example drawings of different orientation & sizes of plates welded to pipe.

5mm Top

10mm Face

10mm Top

100x6 Kickplate

100x6 kickplate requires a 5mm bevel butt, continuos fillet weld all-round. Below is an example drawing showing this.

Rail to Rail

When welding pipes directly to other pipes, a 4mm V butt weld all-round is required. This symbol is used on such items as welding mitred pipes or welding 3300 to pipes for balustrade panels.

On Site Weld (ID)

The symbol shown on the drawing below (5mm fillet weld all-round) represents a requirement to site weld, rather than weld in house. This particular symbol would only appear in our installation drawings (ID).

BridgeRail Welded Post

description...