On this page are examples of all different types of drawings to be referenced when creating DI, PDs, FABs, and INS. Before you add example drawings If you're adding an example drawing please make sure you use the appropriate wiki formatting.

Make sure it is in the appropriate section, ask a design coordinator first before making these changes.

Basic Drawing Layout Guide

Here is the basic drawing layout guide which can help new drafters understand DI's, PD's, and INS drawings.

General Arrangement

A general arrangement drawing, or GA drawing, is a type of drawing that shows the overall layout and dimensions of a structure or object, such as a building, a bridge, or a machine. It shows how the different parts and components fit together and where they are located. GA drawings are used to plan, design, and construct projects, and to communicate the design to other people involved in the project, such as engineers, architects, and contractors.

GA drawings usually include different views of the structure or object, such as plans (top view), sections (cut view), and elevations (side view). These views are drawn to scale and show the exact measurements and orientations of the parts and components.

GA drawings may also include pictorial views, such as isometric drawings, which show the structure or object in three dimensions. These views are not drawn to scale, but they help to visualize the overall shape and appearance of the structure or object.

Reference Models

When using a reference model for a design intent, remember to include a note on all DI drawings that the reference model:" " has been used.

Title Page

Design Intent

Production/Fabrication/Rolled Drawings

Install Drawings

Disability Ramp

Small Stair

Mezzanine

Fire Stairs

Fire stairs are staircases that are designed for emergency use in case of a fire or other disaster. They provide a safe and quick way to exit a building and prevent the spread of fire. Fire stairs are usually isolated from the rest of the building by fire-resistant walls and doors.

It is important to show all measurements in a general arrangement drawing of fire stairs because they help to ensure that the fire stairs are built according to the design and safety requirements. Accurate measurements help to avoid errors, save time and money, and ensure quality and accuracy. They also help to communicate the design to other people involved in the project, such as engineers, architects, and contractors.

When creating GA drawings for fire stairs, an isometric view of the section should be shown before the section view of the stairs themselves to help enhance the understanding and communication of the design.

Fire stairs DI

Fire stairs INS

Trolley Bay

Ladder

Ladders are designed to follow AS1657.

Single Parts

CB Standard Parts

MD530.2000.100

MD531.100

In the Master Fittings and Fixings list this part is labelled as MD531, however in Tekla for the part to number it needs to have the assembly number MD531.100

MD535.2000.100

CB tracing tool settings

Height

Rod diameter

MD540.2000.100

MD550.2000.100

BAL.ASM.CTM

CB30/35 End Closure

CB Fabricated

90 Degree Panel

90 Degree Rounded Panel

180 Degree Flat Panel

Angled Panel

Straight Transition Panel

Mitered Closure Panel

Closure Panel Angled

MD545.2000.100 BridgeRail

All balustrades have 5mm diameter holes on the ends of the pipe as they are needed to thread wire through. Once the panel has been secured by the wire, the panel can then be lowered and immersed in a bath of molten zinc at a temperature of around 449 °C.

MD580.2000.100 BridgeRail

Welded Mitered CB Closure Flat

Standard Pipe Parts

MD574

BIKESAFE Closure Bend

MD575

TUFFRAIL Closure Bend, Horizontal - D48

MD578

The only MD578 that are stocked and used by CAD is MD270_270 for TR corners. All other MD578 sizes are not stocked, however sales can still use them as standard parts for CAT 1 BOM jobs.

MD578.270_270

MD578.450_450

MD578.400_750

MD578.750_750

MD578.750_1250

Gate Drawings

MD582PC

Bent Pipe Multidrawings

Rolled Pipe Multidrawings

XYZ Drawings

If you need any help creating these drawings, click the hyperlink to view the XYZ video tutorial

Mitered Handrail

Welded Handrail

Welded Stanchions

FAB Book welded stanchion drawing

PD Book stanchion drawing

Baseplates

3010

2 hole baseplate, 102mm

3011

4 hole baseplate, 102mm

3012

Corner baseplate, 88mm

3070

2 hole baseplate, 126mm

When using any CB product on a stair stringer, we either need to use a 3070 welded baseplate or bend the stanchion pipe and use a MD232.
When mounting to pre-drilled holes, the 3070 needs to be used, but any other time a bent post can be used.