Revision as of 02:12, 5 March 2024

Moddex Bikesafe barriers ensure you protect cyclists, especially those travelling at speed, and eliminate or mitigate injury from falls. Bikesafe systems are quick and easy to install, with curved sections to flow with cycle ways.

The smooth continuous top rails help prevent or mitigate injury for both pedestrians and cyclists.

And your cycleway barriers can form part of a cohesive solution. Modular Bikesafe bikeway barriers are designed to integrate easily with our Conectabal and Assistrail range.

With six configurations available in the Bikesafe family, Moddex bikeway barriers offer:

Continuous full or partial offset barriers for protection across culverts, bridges, headwalls and hazards
Smooth and continuous top rails for injury prevention
Curves to flow with bike paths or cycle ways

Bikesafe Systems

BS10 - Bikeway barrier with offset top rail

BS20 - Bikeway barrier with offset top rail and midrail

BS25 - Bikeway barrier with offset top rail and handrail

BS30 - Bikeway barrier with offset top rail, midrail and bottom rail

BS35 - Bikeway barrier with offset top rail, handrail and bottom rail

BS40 - Bikeway barrier with offset top rail and balustrade infill

BS45 - Bikeway barrier with offset top rail, handrail and balustrade infill

Compliance

Moddex balustrades and handrails are designed and manufactured in accordance with Austroads Guide to Road Design and relevant statutory WHS Codes of Practice/ Guidelines. Galvanized to AS 4792 and AS/NZS 4680:2006 (where applicable).

Common compliances

Design Notes

Make sure there is a 50mm gap between the closure and the end of the handrail.

Incorrect

Correct

Design tips

Technical data

Material
Stanchion & Rails	Clamp Fittings	Clamp locking screws
Steel/grade C250 & 350	Malleable Cast iron	Stainless Steel (304)

Protective Coating
Stanchion, rails & balustrade	Clamp fittings	Optional
G390 Hot Dip Galvanized (min 390g/m2)	Hot-dip Galvanized with patented protective coating on threads	Powder coating and paint specs*

Dimensions

Stanchions & Rails
Diameter	Nominal Thickness
48.3mm OD	3.2mm

Clamp Fittings
Thickness	Locking Screws
5.0mm (approx)	M12 x 1.75 x 11mm - DEXX® Drive

Fixings

Fixings
Concrete	Structural Steel
M12 galvanized mechanical concrete anchor FX12113.12.100 Concrete Screw Bolt, M12 x 100mm - Galvanized	M16 galvanized high tensile bolt set FX22113.16.050 Structural Bolt, Nut & Washer Assembly, M16 x 50mm - HDG

@@ Line 36: / Line 36: @@
 =Design Notes=
+*Make sure there is a 50mm gap between the closure and the end of the handrail.
+<b>Incorrect</b>
+[[File:Wrong Bikesafe design.PNG|frameless|400px]]
+<b>Correct</b>
+[[File:Correct Bikesafe design.jpg|frameless|400px]]
 =Design tips=

Bikesafe: Difference between revisions